LED strips are common in daily life lighting. They can be seen everywhere in outdoor shopping malls, restaurants, and hotels. Indoors, it can be said that almost all household lighting uses LED strips. On the one hand, it is an indirect lighting method, on the other hand. On the one hand, it plays a very good decorative effect and creates an atmosphere of the environment. But we can find that the LED lights sometimes emit unevenly and dimly. What is the situation? How to solve it?
LED light strips are mainly installed in light troughs to create a large area of luminous ceilings and walls, and to shape the effect of wall washing. It is precisely because of its large lighting range that once a problem occurs, it will affect a wide range of light and shadow effects. When we choose LED light strips, we must keep our eyes open and choose carefully.
Good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, the light is uniform, and the brightness of the head and tail of the light strip should be the same. The light color of the light strip should also be the same. Use white paper to stick to the light-emitting surface of the light strip and observe it directly with the eyes. In order to have a uniform luminous effect, it is necessary to choose good color rendering when purchasing. The color rendering index Ra>80 is the requirement that a professional LED light strip must meet. This is also the requirement of the national standard GB50034-2013.
Incorrect installation of the light strip will also affect the lighting effect.
If the wall is not evenly painted, the light will be uneven, and we can use the installation frame to solve this problem. The light-emitting angle of LED light strips is usually only 120°, and some light troughs are too high for us to see the light produced by LED light strips. In this regard, you can raise the LED light strip to keep the distance between the light strip and the upper edge of the light trough at about 4-125px, or stick the light strip on the side wall.
If the light strip is too long and the tail brightness is not enough, you can use a higher power constant voltage driver. For example, a 6-meter light strip uses a 4A electrical appliance to ensure that the electrical appliance has enough margin without causing waste; you can also change the lamp. The connection method of the belt can solve the problem that the tail does not light up.
The installation of LED light strips should be combined with different indoor and outdoor environments, and installed correctly according to the actual use, in order to ensure a good light output effect and prolong the service life. The use of light strips is more to create an environment and add more interest to life!
How to solve the uneven lighting of LED lights?
2022 08/13